Aprilaire Humidifier Water PanelAt the heart of the Aprilaire humidifier lies the Aprilaire humidifier water panel. You have to install the Aprilaire Humidifier in conjunction to the motor of the furnace blower. Once the Aprilaire humidifier control gives a signal for humidity, the blower motor will start running. With the start of the blower motor, water will slowly flow into the distribution tray in the Aprilaire humidifier water panel. The water from the distribution tray will get distributed uniformly across the width of the tray with the help of scientifically designed system of outlets. The water due to gravity will flow over the water panel evaporator. Dry and hot air will then move through the water panel evaporator, which is moisture laden. This is the place where the evaporation process will take place. The humidified air will then carry the moisture in the form of vapor into the home where it will be uniformly circulated. The orifice always determines the flow of water, which is equipped with a drain type unit. When the Aprilaire humidifier water panel starts operating, a small stream of water will start draining. This stream of water will flush away the damaging minerals as well as some magnesium and calcium residues. At this point, it is advised not to use the saddle valve to regulate the flow of water flow. The saddle valve has been designed for two functions: opening it and closing it. If you keep it open then chances are that the humidified air will escape. The Aprilaire humidifier water panel is available for different models. Here are some of the Aprilaire humidifier water panels:
|